TOLL FREE: 1.877.243.7325 · E-MAIL
HOME > DURASHIELD SEALS > RX SERIES
 
image-1

RX Series are specifically designed to address the need for a heavy duty food and
pharmaceutical grade seal that can withstand the rigors of daily sanitization or sterilization. Capable of being applied to any environment that an SD Series seal would be utilized. The RX Series pushes the capabilities further with enhanced ease of cleansing and rebuilding.

Addi-tionally a third drain port allows for quick internal sanitization with out removing face of seal. Considerations to remember, this back mounted design needs to be incorporated with a bearing configuration that allows for easy access to face of seal.

RX series seals can be manufactured in virtually any shaft size for all applications.
The RX series shaft sizes range 1.50" to 4.50"
please contact us for more details

 

• General installation notes: download
• AIR Purge installation notes: download
• General Maintenance & Rebuild info download
• RX Series Installation Guide download
• Technical Specs & Sizes download


 




 


Technical specifications:
• Operating Temperature: -60˚F to 550˚F
• Pressure Holding: 20 psig. Max
• Vacuum Holding: 10 inHG Max
• Air Purge Connection Start Pressure: 15 - 20 psig.
• Typical Air loss: 1.5 - 2.0 SCFM
• Torque setting for seal mounting: 60 Pounds
• Maximum Shaft Run Out: .250" TIR.
• Stuffing Box Misalignment: .015 TIR per inch of shaft
• Shaft Growth: ± 1/16”
• Shaft Tolerance: ± 1/16”
• Max. Out of Square Mounting Deviation: 1°
• Field Repairable: YES
• Food Service:YES
• Sanitization: C.I.P. Clean in place (w/ in-out purge ports)
• Chemical Resistant Configurations: YES
• Standard Housing Material: 316 STAINLESS STEEL
• Standard Wear Plate Material: PEEK Un-Filled
• Standard Stainless Steel Type: 316 STAINLESS STEEL
• Standard Elastomer Type: FDA COMPLIANT EPDM
• Shaft Speed: Variable by shaft diameter


DIMENSIONS
SHAFT DIA
-A-
Housing
-B-
Bolt Sq. Max
-C-
Bolt Sq. Min
-D-
Slot Width
-E-
Elastomer Adjust
-F-
Air Connect
-G-
Seal Width
-H-
1.50" - 1.69"
7.00" DIA
4.25"
4.00"
.66"
2.62"
1-7/8"
3.50"
1.75" - 2.00"
8.50" DIA
5.13"
4.25"
.66"
3.20"
1-7/8"
3.50"
2.25" - 2.50"
10.50" DIA
5.88"
5.38"
.68"
3.51"
1-7/8"
3.50"
2.69" - 3.00"
11.25" DIA
6.13"
5.88"
.80"
4.10"
1-7/8"
3.50"
3.38" - 3.50"
12.50" DIA
7.48"
6.17"
.80"
4.50"
1-7/8"
3.50"
3.94" - 4.50"
13.50" DIA
8.16"
6.67"
.94"
4.75"
1-7/8"
3.50"

Dimensionaly configured for CEMA Standard 300-013 U-Trough End Plates. RX Series Seals are made to order.

Elastomer options:

Standard
FDA Compliant
· Max temperature 350° F
· Min temperature -65° F


Where chemicals are used or a concern our CHEM-RING design provides a reliable seal for chemical processing.
CHEM-RING eliminates the need for a Silicone elastomer and uses either Viton, Kalrez or EPDM O-Rings and functions as a true mechanical seal. Contact AGD today for more information regarding CHEM-RING